BTC on Paper Exclusive: Framesi's White Stripe Men's Color

STEPS

1. 1
   

   Create a triangular section between the ends of the eyebrow arches and the vertex. Separate a thin strand on both sideburns. Trace a line from ear to ear passing through the vertex.
2. 2
   

   Create a horizontal line from the tip of each ear and divide the section on the nape.
3. 3
   

   Divide the rear part of the crown area from the section that lies below it.
4. 4
   

   Start the cut in the front section. Comb the hair straight down and cut square at the bridge of the nose.

5. 5
   

   Using the fringe length as a guide, cut the two side sections square.
6. 6
   

   Using the previous side section as a guide, cut the back section diagonally, lifting the hair in vertical subsections.
7. 7
   

   Following the guide, cut the crown area by lifting diagonal sections radiating from the center like the spokes of a wheel.
8. 8
   

   Divide the nape section in half vertically. Lift vertical subsections and use the length of the rear perimeter as a guide.
9. 9
   

   Lift vertical sections in the nape area from side to side and layer the section, using the section above as the length guide.
10. 10
    

    Now texturize this section with a razor, leaving approximately 2½ inches of length.
11. 11
    

    Shape the sideburns, leaving them long and wispy.
12. 12
    

    Work through the entire cut, use shears to texturize and remove weight.
13. 13
    

    Create a front triangular section as shown. Apply Formula A to this section and lift to Level 9-10.
14. 14
    

    Formula A (Decolorizer)
    -Decolor B Cream
    Formula B (Toner)
    -Framcolor Eclectic 9PE + Activator Extra
    Formula C (Base)
    -Framcolor Eclectic 3NE + Activator Basic
15. 15
    

    Tone the decolorized section with Formula B.
16. 16
    

    Apply Formula C to all remaining strands.
17. 17