Events

NAHA Winners the Teal's "Kamryn" How-To

November 12, 2008·1 min read

16968Kamryn Final2_orig
This Bob is short and sweet…and a little sexy.  Ryan and DeAnnalyn Teal of the NAHA Winning Capello Salon gives “Kamryn” a classic but cool coif.  DeAnnalyn gave the natural Level 7 a rich contrasting color before Ryan came in and finished the look with a classic yet edgy cut. Here’s how it was done! Credits: Hair–The Teals; MakeUp–Kamryn Creamer; Photography–Chad Boutin; Production–Teaching ARTistry View Another Step-by-Step: The Teals “Janelle”    Subscribe to behindthechair.com “On Paper” Magazine–4 Issues Only $29.95!  Next Issue: COLOR with Beth Minardi! (more…)
  1. 1Step 1 of 13
    16967Kamryn before_orig

    Kamryn is a natural Level 7 blonde and she wanted something drastic for her color. Colorist DeAnnalyn Teal darkened her base with Paul Mitchell The Color 2oz. 5CB + 2oz. 20 volume developer to give added richness and depth.  Process for 35 minutes at room temperature then rinse and shampoo.

    Mix 2 bowls of bleach for the highlights—one with 5 volume (1 scoop Paul Mitchell Dual Process Bleach + 3oz. 5 volume crème developer) and one with 20 volume (1 scoop Paul Mitchell Dual Process Bleach + 3oz. 20 volume crème developer). The areas where the 5 volume was applied were lifted to a Level 8 with warmth. The areas where the 20 volume was applied were lifted to a Level 9. 

    Using foils, apply the bleach onto alternating back to back to back sections so they look more like slices. The placement should come more from the back of the crown toward the face, rather than on the top of the head. Process for 35 minutes at room temperature, rinse and shampoo.

  2. 2Step 2 of 13
    16957Kamryn 01_orig
    To start the cut, section the wet hair into four large triangle sections, creating a large X at the back of the head.  Four different haircutting techniques to these sections.
  3. 3Step 3 of 13
    16958Kamryn 02c_orig
    Taking radial partings within the back section (triangle at the nape), start at the center or the top of the triangle at the base of the spine. Holding your hand vertically, hold the hair at a 45-degree angle to the head and start the cut. Starting at the hairline, walk the 45-degree angle up to a 90-degree angle at the top of the triangle, rounding the layer as you move.
  4. 4Step 4 of 13
    16959Kamryn 03b_orig
    Working to the left, pick up another radial parting and cut in the same manner, overdirecting the new section to the first section (guide). Continue all the way through that section to the left.
  5. 5Step 5 of 13
    16960Kamryn 04_orig
    Working to the right, take another radial parting and cut in the same manner, overdirecting the new section to the first section (guide). Continue all the way through that section working to the right.
  6. 6Step 6 of 13
    16961Kamryn 05_orig
    Once the entire nape section is done, go back through and point cut the ends to detail the edge. Point cutting will give a softer, more lived-in perimeter.
  7. 7Step 7 of 13
    16962Kamryn 06_orig
    Clean up the edge by razor cutting horizontally, making sure the inverted A-line quality is absolute.
  8. 8Step 8 of 13
    16963Kamryn 07_orig
    Next, drop the right side panel and switch to vertical partings, applying square graduation.  Overdirect all sections of hair following the shape of the head straight back to the previously cut section (guide).
  9. 9Step 9 of 13
    16964Kamryn 08_orig
    Move forward one section at a time, overdirecting the hair into a square graduation while maintaining the length of the hair in front.
  10. 10Step 10 of 13
    16965Kamryn 09_orig
    Horizontal cut side panels with shears in a solid form to remove length. The left side panel should be cut in the same manner.
  11. 11Step 11 of 13
    16966Kamryn 10_orig
    To make sure all the sections are working together, overdirect the top section all to the right, then all to the left, removing any hair along the perimeter that hung below the existing line.
  12. 12Step 12 of 13
    16950Kamryn Final1a_orig
    To style, shampoo and condition with a straightening formula, add a thickening cream cocktailed with 4-5 squirts of shine spray and apply all over the hair. Section the hair into the same four sections you created for the cut, then blow dry each section, starting at the nape and flat wrapping the hair to the shape of the head. Once dry, dust an aerosol spray onto your brush and work in with a blow dryer.
  13. 13Step 13 of 13
    16968Kamryn Final2_orig
    For a more “undone” look, work a matte shaping cream all over the hair and use a blow dryer to apply hairspray, working upwards.  Use more shaping cream to piece through the ends.