Bobs & Lobs

Classic Angled Bob

April 23, 2015·1 min read

48592TG final_orig
Combining classic approaches to cutting with modern sihoulettes, the new TONI&GUY Classics Collection, is a celebration of the fundamental cutting techniques you use every day from the cutting experts at TONI&GUY. This, sleek, angled bob creates a strong line from short in the back and lightly longer in front. Mastering this cut and refining the style is a “must” for every stylist with short-haired clients—especially going into the summer months when clients want shorter styles. It offers a modern shape yet still allows for lots of movements and styling versatility.   Want to learn the whole collection? CLICK HERE to (more…)
  1. 1Step 1 of 19
    48399TG1_orig

    Establish a profile parting from the font hairline to the nape. Take a diagonal forward parting from the occipital out to the middle of each ear, and take a vertical section no wider than 1-inch.

  2. 2Step 2 of 19
    48400TG2_orig

    Comb perpendicular, then elevate to 45 degrees. Starting at the top of the section, cut to decrease the length down to the nape.

    Want to learn the whole collection? CLICK HERE to enter BTC University! 

  3. 3Step 3 of 19
    48401TG3_orig

    Take the bottom section of hair, using the vertical section as a guide to length, and take the first pivoting diagonal forward to the corner of the hairline, comb perpendicular, elevate to 45 degrees and cut to decrease the length.

  4. 4Step 4 of 19
    48402TG4_orig

    Take the second pivoting diagonal forward section through the side hairline. With the same distribution and elevation, cut to follow the guide.

    Want to learn the whole collection? CLICK HERE to enter BTC University! 

     

  5. 5Step 5 of 19
    48403TG5_orig

    Take the last pivoting section, comb perpendicular to the original diagonal forward parting, elevate to 45 degrees and cut to follow the guide.

  6. 6Step 6 of 19
    48404TG6_orig

    On the opposite side, take the first pivoting section to the corner of the hairline, change your hand position with your fingers pointed down, comb perpendicular, elevate to 45 degrees and cut to follow the guide.

  7. 7Step 7 of 19
    48405TG7_orig

    Take the second pivoting diagonal forward section through the side hairline. With the same distribution and elevation, cut to follow the guide.

    Want to learn the whole collection? CLICK HERE to enter BTC University! 

  8. 8Step 8 of 19
    48406TG8_orig

    Take the last pivoting section, comb perpendicular to the original diagonal forward parting, then elevate to 45 degrees and cut to follow the guide.

  9. 9Step 9 of 19
    48407TG9_orig

    Cross-check by pulling equal amounts of hair from the same reference point and measure to see if the lengths are balanced.

  10. 10Step 10 of 19
    48408TG10_orig

    Take a horizontal section, from just below the crown, though the recession area. Return to center back and keep the profile parting in place. Comb to natural fall, elevate to a stationary 45 degrees and cut onto the guideline.

  11. 11Step 11 of 19
    48409TG11_orig

    At the ear area, tap the hair above and below the ear to relax the amount of tension for the ear protrusion. Cut the line square, increasing in length, following the jaw line.

    Want to learn the whole collection? CLICK HERE to enter BTC University! 

  12. 12Step 12 of 19
    48410TG12_orig

    Repeat this technique on the opposite side. Continue to tap the hair above and below the ear, and cut the line square, slightly increasing in length.

  13. 13Step 13 of 19
    48411TG13_orig

    Cross-check by pulling equal amounts of hair from the same reference points and measure to see if the lengths are balanced.

  14. 14Step 14 of 19
    48412TG14_orig

    Release the remaining hair and continue by following the techniques in Steps 10 through 13. At the front hairline, slightly overdirect the hair to preserve the corner.

  15. 15Step 15 of 19
    48413TG15_orig

    Take a 1-inch profile section from the front hairline to the crown. Using the guide from the crown and the front hairline perimeter, comb perpendicular, elevate to 90 degrees and point-cut on an angle from short to long.

    Want to learn the whole collection? CLICK HERE to enter BTC University! 

  16. 16Step 16 of 19
    48414TG16_orig

    Take a vertical section, overdirect to the center guide, elevate to 90 degrees and cut from short to long. Work the technique through to the parietal ridge.

  17. 17Step 17 of 19
    48415TG17_orig

    Repeat the technique on the opposite side. Cut to decrease in length. Stand on the opposite side of the section being cut, to keep the overdirection consistent.

  18. 18Step 18 of 19
    48416TG18_orig

    Finish by cross-checking the layers with the horizontal sections. Visually, the line should create a slight U.

  19. 19Step 19 of 19
    48592TG final_orig