Hair Color

BTC on Paper Exclusive: Framesi's White Stripe Men's Color

January 20, 2011·1 min read

25218After_orig
The slender, milky panel peeking through the rich, chocolate base seasons this look from Framesi’s Next Dandy collection with just the right amount of intrigue. The rounded shape of the cut is the perfect choice to display the soft, silky texture of the hair, and the entire effect is, well…fine and dandy! (more…)
  1. 1Step 1 of 17
    25219Sectioning 1_orig
    Create a triangular section between the ends of the eyebrow arches and the vertex. Separate a thin strand on both sideburns. Trace a line from ear to ear passing through the vertex.
  2. 2Step 2 of 17
    25220Sectioning 2_orig
    Create a horizontal line from the tip of each ear and divide the section on the nape.
  3. 3Step 3 of 17
    25221Sectioning 3_orig
    Divide the rear part of the crown area from the section that lies below it.
  4. 4Step 4 of 17
    25222Cut 1_orig

    Start the cut in the front section. Comb the hair straight down and cut square at the bridge of the nose.

  5. 5Step 5 of 17
    25223Cut 2_orig
    Using the fringe length as a guide, cut the two side sections square.
  6. 6Step 6 of 17
    25224Cut 3_orig
    Using the previous side section as a guide, cut the back section diagonally, lifting the hair in vertical subsections.
  7. 7Step 7 of 17
    25225Cut 4_orig
    Following the guide, cut the crown area by lifting diagonal sections radiating from the center like the spokes of a wheel.
  8. 8Step 8 of 17
    25226Cut 5_orig
    Divide the nape section in half vertically. Lift vertical subsections and use the length of the rear perimeter as a guide.
  9. 9Step 9 of 17
    25227Cut 6_orig
    Lift vertical sections in the nape area from side to side and layer the section, using the section above as the length guide.
  10. 10Step 10 of 17
    25228Cut 7_orig
    Now texturize this section with a razor, leaving approximately 2½ inches of length.
  11. 11Step 11 of 17
    25229Cut 8_orig
    Shape the sideburns, leaving them long and wispy.
  12. 12Step 12 of 17
    25230Cut 9_orig
    Work through the entire cut, use shears to texturize and remove weight.
  13. 13Step 13 of 17
    25231Color 1_orig
    Create a front triangular section as shown. Apply Formula A to this section and lift to Level 9-10.
  14. 14Step 14 of 17
    25218After_orig
    Formula A (Decolorizer)
    -Decolor B Cream
    Formula B (Toner)
    -Framcolor Eclectic 9PE + Activator Extra
    Formula C (Base)
    -Framcolor Eclectic 3NE + Activator Basic
  15. 15Step 15 of 17
    25232Color 2_orig
    Tone the decolorized section with Formula B.
  16. 16Step 16 of 17
    25233Color 3_orig
    Apply Formula C to all remaining strands.
  17. 17Step 17 of 17
    25218After_orig